Huawei LUNA2000-2.0MWH Series User Manual page 146

LUNA2000-2.0MWH Series Smart String ESS
User Manual
●
Issue 15 (2023-11-01)
Figure 5-16 Installing the battery in the extinguishant control panel
e. Close the extinguishant control panel.
f. Remove the key from the extinguishant control panel.
NO TE
Hand over the key to the responsible personnel for safekeeping.
Model: K11031M2
CA UTION
If the extinguishant control panel has been powered off for more than 24
hours, cables between the extinguishant control panel and the battery must
be disconnected. Otherwise, the battery may be overdischarged and needs to
be replaced.
a. Remove the key from above the extinguishant control panel and open the
extinguishant control panel.
b. Cut off the cable ties from battery cables on the main board of the
extinguishant control panel.
c. Connect battery cables to the extinguishant control panel.
Copyright © Huawei Technologies Co., Ltd.
5 Installation
135