LUNA2000-2.0MWH Series Smart String ESS
User Manual
● Place a wooden block on the top of an expansion bolt, and then knock at the
● Ensure that the expansion bolts are tightened when securing the angle steel to
Figure 5-8 Securing the ESS
----End
Issue 15 (2023-11-01)
CA UTION
wooden block using a claw hammer to avoid damaging the expansion bolt.
the base.
NO TE
● There are four mounting holes where angle steel brackets contact the base. Mark all
mounting holes.
● Each angle steel bracket must be secured by two mounting holes. It is recommended
that the outer two mounting holes be used. If steel bars in a concrete base block the
drill bit or when the position deviation occurs during the first drilling, use the inner
mounting holes.
Copyright © Huawei Technologies Co., Ltd.
5 Installation
124