LUNA2000-2.0MWH Series Smart String ESS
User Manual
Procedure
Step 1 Connect hoisting ropes, and hoist the ESS onto the concrete platforms.
The requirements of distances between the corner of the ESS and the edge of the
foundation are the same for the four corners of the ESS. The figure uses one of
the corners as an example.
Figure 5-2 Hoisting the ESS
Step 2 Cut open the protective cover using a utility knife and remove the protective cover.
● When removing the protective cover, take protective measures for working at
● Do not remove the protective cover in bad weather conditions such as rain and
----End
Issue 15 (2023-11-01)
NO TE
● You are advised to level concrete platforms before hoisting the ESS.
● The horizontal error of concrete platforms cannot exceed 5 mm.
● Prepare and install the lifting eyes and steel ropes.
NO TICE
WARNING
heights.
snow.
Copyright © Huawei Technologies Co., Ltd.
5 Installation
118