Table of Contents
Advertisement
SandCat-2000 Series User Guide
3 Hardware Installation
3.1
Electrical Safety Information
1
Voltage, frequency, and current requirements must be met according to the manufacturer's
label. Using a power source other than those specified power rating may cause improper
operation, damage to the equipment, or pose a fire hazard.
2
This equipment contains no user-serviceable parts. Service should only be provided by
qualified technicians.
3
Power cords for this equipment should come with an integrated safety ground wire that can
be connected to grounded safety outlets.
4
It is not recommended to replace the power cord with one that is not approved by the
manufacturer. Connecting an adapter plug to a 2-wire outlet will defeat the continuity of the
grounding wire.
5
Modification or misuse of the ground wire can cause serious injury or death; the ground wire
is required as part of the safety certification.
6
In case of questions regarding the installation, contact a qualified electrician or the
manufacturer.
7
AC adapters with Listed certification provide protective earthing. Short-circuit backup
protection shall be provided in the building installation.
8
Local and national wiring regulations and guidelines must be followed when installing
protective bonding.
3.2
Environment and Enclosure Guidelines
Before installation, review these environmental and enclosure guidelines:
In accordance with IEC publication 60664-1, this equipment is intended for use in an industrial
environment with pollution degree 2, overvoltage Category II applications, and at altitudes up to
6561 feet (2000m). As per IEC/CISPR Publication 11, this equipment is classified as Group 1, Class A
SandCat-2000 Series User Guide
Page 20 of (34)
Advertisement
Table of Contents
