Operation; Switching The Appliance On; Setting The Temperature; Temperature Zones - V-ZUG Cooler V2000 152FGI Operating Instructions Manual

4

Operation

4.1

Switching the appliance on

▸ Plug in the appliance at the mains socket.
– «OF» appears on the left- and right-hand side of the display for 30 seconds.
▸ Hold the button depressed for 3 seconds.
– The appliance is switched on.
A newly installed appliance takes around 6 hours (empty state / without any food
inside) to reach the operating temperatures. The corresponding zones
to flash in the display until the temperatures are reached.
4.2

Setting the temperature

Setting range
The required temperature for each zone is entered one after the other.
Temperature zone
Refrigerator compart-
ment
Freezer compartment
Procedure
▸ Open the refrigerator compartment door.
– The selected set temperature values are displayed for 5 seconds
– and then the actual temperature values are displayed.
▸ Touch the ,
– The temperature display for the refrigerator compartment flashes on the left-hand
side of the display.
▸ Touch the or
compartment.
▸ Confirm with the
– The temperature display for the freezer compartment flashes on the right-hand side
of the display.
▸ Touch the or
ment.
▸ Confirm with the
– The temperature setting has been entered successfully.
– The temperature will be reached in a few hours, depending on the setting.
The effective temperature may at times be different from the selected set value if
the door is open for an extended period of time or if warm food has been placed
inside.
Setting range
Recommended setting
Setting range
Recommended setting
or button.
button and select the desired temperature for the refrigerator
button to accept the entry.
button and select the desired temperature for the freezer compart-
button to accept the entry.
Degrees Celsius [°C] Fahrenheit [°F]
3 to 8
5
-21 to -17
-18
4 Operation
continue
38 to 46
41
-6 to 1
0
11