Table of Contents
Advertisement
Light s and Vision
.. To increase or reduce the brightness, turn the
knob and press it.
The interior lighting turns on when you switch
the headlights on while the ignition is on .
(i)}
Tips
The setting is a utomat ica lly stored and as-
signed to the remo t e control key th at is in
use.
Instrument illumination
The brightness of the illumination for the instru-
ments, display and head-up display* con be ad-
justed .
Fig. 44 Inst rument illumi nat ion
.. Press the knob to release it .
.. Turn the knob toward" -" o r "+" to reduce or in-
crease the brightness .
" Press t he knob again to retur n it to its original
pos ition.
(D
Tips
The instr um e nt illumination for th e need les
and dia ls tur ns on when t he igni t ion is tur ned
on and t he lights are turned off. The illumina-
t ion for t he dia ls reduces automatically and
eventua lly tu rns off as brightness outside in-
creases . This function reminds the d river to
turn the headlights on at the appropriate
time.
48
Vision
Adjusting the exterior mirrors
Fig. 4 5 Driver's door: knob for the exterio r mirrors
Turn the knob to the des ired position :
Q/P
- Adjusting the left/right exterior mirror .
Move the knob in the des ired dir ect ion .
Qill - Heat ing t he mirror glass d epend ing on t he
outside t emperature .
8 - Folding exterior m irro rs*. In the Infota in-
ment system , you can se lect if t he m irro rs fo ld in
automat ica lly when you lock the vehicle
~ page 33.
Front passenger's exterior mirror tilt
function*
To help you see the curb when backing into a
par king space, the surface of the m irror tilts
s light ly. For this to happen, the knob must be in
the position for the front passenger's outside
mirror.
You can adjust the tilted mirror surface by tu rn-
ing the knob in the des ired directio n. When you
move out of reverse and into anot her gea r, the
new m irror position is stored and assigned to the
key you are using.
The m irror goes back into its or iginal pos ition
once you drive forward faster than 9 mp h (15
km/h) or switch the ignition off.
A
WARNING
Curved (i. e. convex) m irror surfaces increase
your f ield of view. Remember that ve hicles or
ot her objects will appear sma ller and farther
away than when seen in a flat m irro r. If yo u
Advertisement
Table of Contents
