Table of Contents
Advertisement
....
N
0
CJ
'<I:
....
I.Cl
U"I
M
I.Cl
......
- Inspection or oil change reminder:
After a cer-
tain distance driven, a message appears in the
instrument cluster display each time the ign i-
tion is switched on or off ¢ fig. 13. The remain-
ing distance or time is displayed briefly.
- Inspection or oil change due:
If your vehicle is
due for an inspection or oil change or both, a
message appears briefly in the instrument clus-
ter display when sw itching the ign ition on or
off:
Inspection due!
or
Oil change due!
or
Oil
change and inspection due! .
Checking service intervals
You can check the remaining distance or time un-
til the next oil change or next inspection n the
Car menu. To do this, select: the
ICARI
function
button
>
(Car)* Systems
control button >
Service
& control
>
Service intervals .
Resetting the indicator
Your authorized Audi dealer or authorized Audi
Service Facility will reset the service interval dis -
play after performing service .
If you have changed the oil yourself, you must re-
set the oil change interval.
To reset the indicator, select: the
ICARI
function
button >
(Car)* System
control button >
Service
&
control > Service intervals.
Turn the control
knob downward to
Reset oil change interval
and
press the control knob .
(D
Note
- Only reset the oil change indicator if the oil
was changed.
- Following the service intervals is critical to
maintain ing the service life and va lue of
your vehicle, especially the engine. Even if
the mileage on the vehicle is low, do not ex-
ceed the time for the next service.
- Calculating the t ime to the next o il change
is interrupted when the vehicle battery is
disconnected.
If
the vehicle is not dr iven for
a long period of time, check the mainte-
nance schedule so that you can follow the
maintenance int e rvals.
Instruments
and indicator
lights
Head-up display
Applies to vehicles: with Head-up display
Fig. 14
Example : Indicato rs in the Head -up display
Fig. 15
Instrument panel: head-up disp lay knob
The Head-up display projects certain warnings or
selected information from the assistance sys-
tems* or navigation* on the windshield . The dis-
play appears w ithi n the driver's field of vision.
Switching on/off
.. To switch the head-up display on or off, press
the knob~¢
fig. 15 .
Adjusting the height
The height of the display can be adjusted to the
individual driver .
.. Make sure you are seated correctly
r=!) page
126.
.. Turn the knob~
to adjust the disp lay.
Settings in the Infotainment
system
.. Select: the
I
CAR
I
function button>
(Car)* Sys-
tem
control button >
Driver assistance > Head-
up display > Head-up display contents
or
Dis-
play brightness.
.,..
27
Advertisement
Table of Contents
