Table of Contents
Advertisement
....
N
0
CJ
'<I:
....
I.Cl
U"I
M
I.Cl
......
- In cool or damp weather, the inside of the
headlights, turn signals and tai l lights can
fog over due to the temperature
difference
between the inside and outside. They will
clear short ly after switching them on. This
does not affect the service life of the light-
ing.
Turn signals and high beam lever
The lever on the left side of the steering column
is used to operate the turn signals and the high
beam as well as the headlight flasher.
Fig. 39 Turn signal and high beam lever
The turn s ignal and high beam lever has the fol-
lowing f unctions:
Turn signals¢¢
(!)@
N
0
.....
0
~
IJl
• Push the lever up as far as it can go to turn on
the right turn signal or down to turn on the left
turn signal¢
fig. 39 .
• Move the lever brief ly until you meet resistance
and re lease it to flash th ree times.
• Move the lever (up or down) until you meet re-
s istan ce and hold it there to determine the
flashing time for the turn signals.
High beam
~D@
• Push the lever forward to switch on the high
beam (vehicles with high beam assist*
¢ page45).
• Pull the lever back towa rds you to switch off
the high beam .
Headlight flasher
~D@
• Pull the lever toward the steering wheel to use
the headlight flasher .
Lights
and V is ion
Notes on these features
- The
turn signals
on ly work wit h the ignition
sw itched on. The indicator lights
B
or B in
the instrument cluster¢
page 11
also blink.
- After you have turned a corner , the tur n signa l
switches off automatically.
- The
high beam
works on ly when the headlights
are on. The indicator light
II
in the instrument
cluster illuminates when the high beams are
on.
- The
headlight flasher
works only as long as you
hold the lever - even if there are no lights
turned on. The ind icator light
Iii
in the instru-
ment cluster illuminates when you use the
headlight f lasher .
A
WARNING
-
Do not use the high beam or headlight flasher
if you know that these cou ld blind oncoming
traffic.
High beam assist
Applies to veh icles: with high beam assist
Fig. 40 Turn signal and high beam lever: switching high
beam ass ist on/off
A camera on the rearview mirror mount can de-
tect light sources from other road users. The high
beams switch on or off automatically depending
on the posit ion of vehicles driving ahead and on-
coming vehicles, the vehicle speed and other en-
vironmental and traffic cond itions.
Activating high beam assist
Requirement: The AUTO light switch position
must be selected and the high beam assist must
be switched o n in the Infotainment
system
¢ page 46.
45
Advertisement
Table of Contents
