Midea MSXE-10CRDN8 User Manual page 44

Buttons and Functions
1
4
5
8
9
12
Boost
Model:
RG10A1(B2S)/BGEF
Description
ON/OFF
No.1
MODE
No.2
Auto > Cool > Dry > Heat > Fan
NOTE: HEAT mode is not supported by the cooling only
appliance.
ECO/GEAR
No.3
ECO > GEAR(75%) > GEAR(50%) > Previous setting mode
2
> ECO
3
TEMP.
Increases temperature in 1°C (1°F) increments. Max. tem-
No.4
perature is 30°C (86°F).
6 (Press together
7
will alternate the temperature display between the °C & °F).
SET
No.5
Breeze away > Sleep > Follow Me > AP mode >
10
Breeze away
11
[*]: Model dependent
13
OK
14
No.6
Used to con rm the selected functions
TEMP.
No.7
TEMP.
No.8
Decreases temperature in 1°C (1°F) increments. Min. tem-
perature is 16°C (60°F)
FAN SPEED
AU > 20% >40% > 60% > 80% > 100%
No.9
Press the TEMP
speed in 1% increments.
SWING
Starts and stops the horizontal louver movement. Hold
No.10
down for 2 seconds to initiate vertical louver auto swing
feature(some units).
Air magic
Used to start/stop the Air magic and UV-C lamp (if any)
No.11
function.
BOOST
No.12
Boost
Reach desired temperature in shortest possible time.
LED
LED
No.13
CLEAN
Clean
No.14 Used to start/stop the Self Clean or Active Clean function.
No.15
Boost
LOCK
Press together these two buttons simultaneously for 5 seconds
to lock the keyboard. Press together these two buttons for 2
seconds to unlock the keyboard.
& buttons at the same time for 3 seconds
*
*
or button to increase/ decrease the fan
Clean
42
35
*