Meaning Of Used Terms; General Safety Precautions - Daikin RXYQ6BRY16 Installation Manual

Some types of danger are represented by special
symbols:
Electric current.
Danger of burning and scalding.

1.2 Meaning of used terms

Installation manual:
Instruction manual specified for a certain product or
application, explaining how to install, configure and
maintain it.
Operation manual:
Instruction manual specified for a certain product or
application, explaining how to operate it.
Maintenance instructions:
Instruction manual specified for a certain product or
application, which explains (if relevant) how to install,
configure, operate and/or maintain the product or
application.
Dealer:
Sales distributor for products as per the subject of this
manual.
Installer:
Technical skilled person who is qualified to install
products as per the subject of this manual.
User:
Person who is owner of the product and/or operates the
product.
Service company:
Qualified company which can perform or coordinate the
required service to the unit.
Applicable legislation:
All international, European, national and local
directives, laws, regulations and/or codes which are
relevant and applicable for a certain product or domain.
Accessories:
Equipment which is delivered with the unit and which
needs to be installed according to instructions in the
documentation.
Optional equipment:
Equipment which can optionally be combined to the
products as per the subject of this manual.
Field supply:
Equipment which needs to be installed according to
instructions in this manual, but which are not supplied
by Daikin.
2
01_EN_3P748230-1.indd 2
2.

General safety precautions

The precautions listed here are divided into the following
four types.
They all cover very important topics, so be sure to follow
them carefully.
DANGER: ELECTRICAL SHOCK
Switch off all power supply before removing the
electrical component box service panel or before
making any connections or touching electrical
parts.
Do not touch any switch with wet fingers.
Touching a switch with wet fingers can cause
electrical shock. Before touching electrical parts,
turn off all applicable power supply.
To avoid electric shock, be sure to disconnect the
power supply 1 minute or more before servicing
the electrical parts. Even after 1 minute, always
measure the voltage at the terminals of the main
terminal, main circuit capacitors or electrical
parts and, before touching, be sure that those
voltages are 50 V DC or less.
When service panels are removed, live parts can
easily be touched by accident. Never leave the
unit unattended during installation or servicing
when the service panel is removed.
DANGER: DO NOT TOUCH PIPING
AND INTERNAL PARTS
Do not touch the refrigerant piping, water piping
or internal parts during and immediately after
operation. The piping and internal parts may be
hot or cold depending on the working condition
of the unit.
Your hand may suffer burns or frostbite if you
touch the piping or internal parts. To avoid injury,
give the piping and internal parts time to return to
normal temperature or, if you must touch them,
be sure to wear protective gloves.
Also, at least, following information shall be provided at
an accessible place of the system:
Instructions for shutting down the system in case of
•
an emergency.
Name and address of fire department, police and
•
hospital.
Name, address and day and night telephone numbers
•
for obtaining service.
23/01/2023 17:23:34