Adam Equipment GBK Series Manual page 50

Au End
Ct StA
Not available
approved indicators
Ct AnY
Not available
approved indicators
Note: Manual Printing is allowed at zero only when the scale is stable. If set to Auto
the scale will not automatically print when it returns to zero.
On EC approved scales printing is not allowed less than 20 divisions.
Accumulation is only allowed if the weight is greater than 20 divisions.
Accumulate and print when
the scale has reached
stability after the weight is
removed.
If the [Print] key is pressed it
is ignored.
Print continuously if the scale
is stable.
Accumulate immediately
on
when [Print] key is pressed if
the scale is stable.
Print continuously, stable or
not.
on
Accumulate when the [Print]
key is pressed stable or not.
Print after the scale is stable and the
weight has been removed.
If the [Print] key is pressed it is
ignored.
Do not accumulate.
Print continuously if the scale is
stable.
Do not accumulate.
Print continuously stable or not.
Do not accumulate.
48
|
P a g e
© Adam Equipment Company 2011