Adam Equipment GBK Series Manual page 49

Scale will perform the following, depending on the Accumulation and Print Settings:
A
CCUMULATION
SETTINGS
PRINT SETTINGS
mA StA
mA Any
Not available
approved indicators
Au StA
Not available
approved indicators
AC on
Accumulate and Print as soon
as the [Print] key is pressed.
If the [Print] key is pressed a
second time print only,
accumulation will only occur
if scale returns to zero first.
Accumulate and Print as soon
as the [Print] key is pressed.
Even if the scale is unstable.
If the [Print] key is pressed a
on
second time print only,
accumulation will only occur
if scale returns to zero first.
Accumulate and print
automatically as soon as
scale becomes stable.
If the scale goes unstable and
then stable again print the
new stable value. But do not
add to Accumulation.
on
If the [Print] key is pressed
at any time the scale is stable
print only.
Accumulation will only occur
if scale returns to zero first.
AC Off
Print as soon as the [Print] key is
pressed, and the scale is stable.
Do not accumulate.
Print as soon as the [Print] key is
pressed, Stable or not.
Do not accumulate.
Print as soon as the scale is stable.
If the scale goes unstable and then
stable again print the new stable
value.
If the [Print] key is pressed print
again.
Do not accumulate.
47
|
P a g e
© Adam Equipment Company 2011