Dmx Mapping - Vari Lite Strand Leko LED Profile Tunable Warm White User Manual

Leko LeD ProfiLe TunabLe Warm WhiTe
3

DMX MaPPInG

The fixture can be operated by DMX controller. The following tables assumes a DMX start address of 1. When
a different starting address is used, this address becomes channel 1 function and other functions follow in se-
quence.
TABLE 2. 16-BIT MODE
DMX
ParaMeTer
CHannel
1 Intensity (High)
2 Intensity (low)
3 strobe
4 Fan Control
5 Control Channel
DeFaUlTs ranGe DMX
0 0 - 65535
0 0 - 255
0 - 9
10 - 99
100 - 109
110 - 179
180 - 189
190 - 255
0 0 - 255
0-4
05 - 255
0 0 - 255
0 - 5
6 - 10
11 - 15
16 - 20
21 - 25
26 - 30
31 - 35
36 - 40
41 - 45
46 - 50
51 - 55
56 - 60
61 - 65
66 - 70
DesCrIPTIOn
16bit Intensity (Dimmer) Control
0 - 100% Output
strobe s>>>>>F
no strobe Function - shutter open
strobe s>>>>>F
no strobe Function - shutter open
lighting strobe s>>>>>F
no strobe Function - shutter open
random strobe s>>>>>F
Dynamically control fan speed vs leD Output operation.
Control values as follows . . .
automatic fan/output adjustment (Default)
linear control of fan speed and leD max output*
DMX 5 =Highest Constant Fan speed
DMX 255 = lowest Constant Fan speed
* standard mode only
Control Channel used for full fixture settings,
lamp controls, and miscellaneous modes.
set discrete value of desired effect, wait >3 seconds,
then set value to 0 (Idle).
**Function does not require 3 second rule to active, setting
output
to value will automatically activate function
Idle (Default)
Full luminaire reCal -
also Used to Wake fixture up from shutdown
Fixture shutdown
reserved Values
Display - Menu On
Display - Menu OFF
reserved Values
reserved Values
Dimming Curve linear**
Dimming Curve s-Curve**
Dimming Curve square law (Default)**
reserved
Dimmer snap On**
Dimmer snap Off (Default)**
8
user manuaL
W W W.Va r i - L i T e .C o m