Vari Lite Strand Leko LED Profile Tunable Warm White User Manual page 12

Leko LeD ProfiLe TunabLe Warm WhiTe
TABLE 5. CONTROL CHANNEL
ranGe
ITeMs
DMX
86 - 90 reserved Values
91 - 95 reserved Values
96 - 100 reserved Values
101 - 105 reserved Values
106 - 110 reserved Values
standard Mode -
Fixture operates at
111 - 115
maximum output
(Default)
studio Mode -
reduced output
116 - 120
with lower fan
settings
Whisper Mode -
reduced output
121 - 125
with lower fan
settings
126 - 130 reserved Values
131 - 135 reserved Values
136 - 140 Fan On (Default)
141 - 145 Fan auto
146 - 150 reserved Values
151 - 155 reserved
156 - 160 reserved
161 - 165 reserved
166 - 170 reserved
reset fixture to
171 - 175
default
176 - 255 reserved
DesCrIPTIOn
Boost mode – leD output boosted to >120% of
standard output fan speeds increased manage
heat level of leD (may be limited to only run for
XXhrs) nC45 – nC55
standard mode - Full leD Output + Full
Continuous Fan spin at
top speed (loudest setting) (Fan remain at a
constant speed
and do not ramp up and down) nC40
*Fans can be switched between On & auto levels
studio Mode - Fan speed reduced to appropriate
amount to reduce
dB levels >10% of full speed + leD @ max output
approximately 80%
of standard output at appropriate level to ensure
leD work
at optimum temperature and output efficiency
(fan speed remains at a constant speed and do
not ramp up or down)
nC35
silent Mode – ideally Fans do not spin + output
capped at appropriate
level to ensure leD work at optimum temperature
and output
efficiency (Fan should never switch on in this
mode or change speed
if they are on) nC15 target level
Fans run at continuous speed for either standard
or studio mode in isolation to the leD operating
temperature
Fans will reduce / increase speed on demand
based on leD operating temperature for either
standard or studio mode
Will reset all parameters to default with the
exception of the Mx address, fixture mode and
Pixel / Zone selection
POWer CYCle
Holds setting on
power cycle
Holds setting on
power cycle
Holds setting on
power cycle
Holds setting on
power cycle
Holds setting on
power cycle
Holds setting on
power cycle
Holds setting on
power cycle
12
user manuaL
FUnCTIOn
rUles seleCTIOn VIa UI
n/a n/a
Yes
Yes
n/a n/a
n/a n/a
Yes
Yes
Yes
n/a n/a
n/a n/a
Yes
Yes
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
Yes - Will reset
n/a Dmx address, Mode
and pixel group
n/a n/a
W W W.Va r i - L i T e .C o m