Table of Contents
Advertisement
16
2.1.6,
2.1.7.
2.1.8.
Temperature measurements (°C)
Range
Measuring mode
Input terminals
Measuring principle
Probe type to be used exclusively
Resolution
Measuring current
Accuracy (excluding probe}
Linearisation
Temperature coefficient
Response time {excluding probe)
Maximum voltage at the probe tip
Maximum voltage between 0 and earth
Offset function
Function
—220°C to +850°C
Normal Mode (NM)
High Resolution Mode (HRM)
8-pole DIN socket
4-wire resistance measurement
Pt-100, ace. to DIN 43760 e.g. PM9249
: 3% digit display
: 4% digit display
NM
:1 %
HRM :0.1°C
1mA
220°C up to —100°C:
+ (1% of reading + 0.2°C)
—100°C up to +850°C:
+ (0.3% of reading + 0.2°C}
Probe characteristic is linearised within limits stated in DIN43760.
+ (0.01% of reading + 0.003% of range)/°c
O.5s to 2.55
(Depending on measured value)
Depending on probe type number.
30Vrms, 42Vpeak.
— Zero point correction on V =, 200mV range.
Internai and external offset voltages can be compensated.
All measurements are corrected.
The correction range is + 79 pV.
— Measurements on V
= z , A =, & 2W, & 4W and ° C can be given
an offset value (relative reference).
All further measurements will be displayed with respect to this
relative reference,
High frequency voltage measurement (Vhf, optional)
Required optional type numbers
Ranges
Measuring mode
Measuring speed (depending
on measured value)
Resolution
Minimum measurable voltage
Frequency range
Accuracy
(between 1% and-100% of range}
Response time
HF plug in unit PM9258
HF probe PM9211
200mvV, 2V.
20V, 200V with attenuator supplied with PM9211,
Normal mode (NM)
2 3% digit display
High Resolution Mode (HRM) : 4%digit display
3 to 5.4 measurements/s
NM:
100xV in 200mV range
HRM:
10xV in 200mV range
SmV
100kHz — 700MHz
+ (2% of reading + 0.3% of range}
for frequency range 100kHz — 3MHz
Including ranging:
asynchronous start
synchronous start
if
Advertisement
Table of Contents
