Philips PM2528 Operating Manual page 15

Response time (max.} Excluding ranging:
2002 to 2000k 2} NM
HRM 120s 0.61s
HSM 0.15s 0.08 s
NM 06 s 0.56 s
HRM 14 s 0.86 s
HSM. 0.35 s 0.345
NM 20s 19s
20MQ
200M Q.
HRM 23 8 22s
HSM. 1803s 1.7 5
2000M 2 NM 20 s |20 s
HRM |20 s | 20 s
HSM }20 s | 20) 5
Response time (max.) Including ranging:
NOTE: The response time in the 200M Q. and the 2000M Q is
automatically adapted to the measured resistance value.
in the EXT and MAN START mode new output vatues are
represented after the response time.
The times mentioned above are valid at end of range. For lower
resistance values the response time is shorter.
Max. Common Mode voltage Q2W : 6OVrms — _ , _ BBVpeak between 0 and GUARD
250Vrms —_, 400 Vpeak between GUARD and earth
Q4W ; 30Vrms — _ , _ 42Vpeak between 0 and earth
- The GUARD must be connected to 0 at 2 4W
Input protected up to Q2W : 260Vims —, 350Vpeak
Q4W > 30Vrms , 42Vpeak