Speakers - HP 240R G9 Maintenance And Service Manual

Table 5-6 Solid-state drive descriptions and part numbers
Description
1 TB (M.2 2280)
1 TB (M.2 2280) (for use in the People's Republic of China)
512 GB (M.2 2280)
512 GB (M.2 2280) (for use in the People's Republic of China)
256 GB (M.2 2280)
128 GB (M.2 2230)
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the drive to the system board.
2. Remove the drive (2) by pulling it away from the connector.
NOTE:
NOTE:
To install the solid-state drive, reverse this procedure.

Speakers

To remove the speakers, use this procedure and illustration.
Rubber feet on page
Bottom cover on page
Battery on page
Solid-state drives are designed with notches to prevent incorrect insertion.
The illustration below shows the M.2 2280 form factor.
Preparation for disassembly on page
30).
31).
32).
Spare part number
N45474-005
N77394-005
N45476-005
N77392-005
N45477-005
N42382-005
30).
Speakers 37