Table of Contents
Advertisement
7.
Flex the inside of the top edge (1), left and right sides (2), and the inside of the bottom edge (3) of the
display bezel until the bezel disengages from the display rear cover.
8.
Remove the bezel (4).
The bezel is available as spare part number M99758-001.
NOTE:
only when you insert it from the outside of the top, left, and right sides of the bezel. Use your fingers
to lift up on the bezel. Avoid pressing down on the panel during removal.
9.
To remove the camera module:
a.
Lift the camera module (1) to disengage the adhesive that secures the module to the display.
b.
Lift the tape (2) on the cable, and then disconnect the cable (3) from the module.
The camera module is available as spare part number N06925-001.
48
Chapter 5 Removal and replacement procedures for authorized service provider parts
To avoid damaging the panel, do not use a tool to release the inside of the bezel. Use a tool
Advertisement
Table of Contents
