HP 240R G9 Maintenance And Service Manual page 83

Table 11-1 Power cord requirements for specific countries and regions (continued)
Country/region
Germany
India
Israel
Italy
Japan
Netherlands
New Zealand
Norway
People's Republic of China
Saudi Arabia
Singapore
South Africa
South Korea
Sweden
Switzerland
Taiwan
Thailand
United Kingdom
United States
1. The flexible cord must be Type HO5VV-F, three-conductor, 0.75 mm² conductor size. Power cord set
fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible
for evaluation in the country or region where it will be used.
2. The flexible cord must be Type SVT/SJT or equivalent, No. 18 AWG, three-conductor. The wall plug
must be a two-pole grounding type with a NEMA 5-15P (15 A, 125 V AC) or NEMA 6-15P (15 A, 250 V AC)
configuration. CSA or C-UL mark. UL file number must be on each element.
3. The appliance coupler, flexible cord, and wall plug must bear a T mark and registration number in
accordance with the Japanese Dentori Law. The flexible cord must be Type VCTF, three-conductor,
0.75 mm² or 1.25 mm² conductor size. The wall plug must be a two-pole grounding type with a
Japanese Industrial Standard C8303 (7 A, 125 V AC) configuration.
4. The flexible cord must be Type RVV, three-conductor, 0.75 mm² conductor size. Power cord set
fittings (appliance coupler and wall plug) must bear the CCC certification mark.
5. The flexible cord must be Type H05VV-F three-conductor, 0.75 mm² conductor size. KTL logo and
individual approval number must be on each element. Approval number and logo must be printed on
a flag label.
6. The flexible cord must be Type HVCTF three-conductor, 1.25 mm² conductor size. Power cord set
fittings (appliance coupler, cable, and wall plug) must bear the BSMI certification mark.
Accredited agency
VDE
BIS
SII
IMQ
JIS
KEMA
SANZ
NEMKO
CCC
SASO
PSB
SABS
KTL
SEMKO
SEV
BSMI
TISI
ASTA
UL
Requirements for specific countries and regions
Applicable note number
1
1
1
1
3
1
1
1
4
7
1
1
5
1
1
6
1
1
2
77