Advertisement
Note: Power should be disconnected from the power supply before
connecting it to the switch. Otherwise, your screwdriver blade can
inadvertently short your terminal connections to the grounded enclosure.
WARNING - EXPLOSION HAZARD – Do not disconnect the ICRL-U-
8RJ45-DIN unless the power has been removed or the area is known to be
non-hazardous.
Dry Relay
PWR1
Output
+
-
Grounding the
Switch
There is an earth
ground screw on the
bottom of the switch.
Connect the earth
ground screw of the
switch to a grounding
surface to ensure safety
and prevent noise.
DC Power Output
10-60VDC
PWR2
+
-
12-24AWG
DC Power
12-24AWG
10-60VDC
Earth Ground
Screw
Earth Ground
Warning: Do not connect to AC line – Neutral
Power Supply
10-60VDC
(UL Listed)
V-
V+
Verify the Power Input requirements
on the product label.
Power Supply
10-60VDC
(UL Listed)
V-
V+
Alm
PW1
3
AC Power Input
AC Power Input
PW2
Alarm Control
port 1~8
power
Advertisement
