Introduction ICRL-U-5RJ45-G-DIN and ICRL-U-4RJ45/SFP-G-DIN are a compact size Ethernet unmanaged Gigabit switches, which ensure high switching performance and easy installation. Along with its high switching performance, it supports multiple internal performance features, such as 9K bytes Jumbo Frame, Flow Control, and it ensures quality traffic transmission.
Note: The relay contact only support 1A current, 24VDC. Pepperl+Fuchs does not recommend apply higher voltage and current that over this specification. Electronic.indd 3 12/4/2019 9:16:57 AM...
Connecting to Network Connect one end of an RJ45 Ethernet cable into the UTP port of switch, while the other end is connected to the attached networking device. The UTP port supports the auto MDI/MDIX function. Ethernet cables are categorized into unshielded twisted-pair (UTP) and shielded twisted-pair (STP) cables.
ATTENTION This is a Class 1 Laser/LED product. Do not look into the Laser/LED beam. LEDs The LNK / ACT LED turns on for link up and blinks for packet transmit and receive. The Speed LED turns on for Gigabit link and turns off for 10/100Mbps link.
Mounting the Switch You can mount the switch on a DIN rail. The DIN rail clip is attached to the switch, which supports the EN 50022 DIN Rail standard. Insert the upper end of DIN rail clip into the back of DIN rail track from its upper side.
Customer Service You can use one of the following methods to contact Pepperl+Fuchs. Worldwide Headquarters Pepperl+Fuchs AG 68307 Mannheim, Germany +49 621 766-0 info@de.pepperl-fuchs.com USA Headquarters Pepperl+Fuchs, Inc. Twinsburg, Ohio 44087 - USA +1 330 425 3555 sales@us.pepperl-fuchs.com Asia Pacific Headquarters Pepperl+Fuchs Pte Ltd.