Advertisement
LED Indicators
There are system diagnostic and Ethernet port LEDs located on the
front panel of the switch.
LED
PWR 1/
PWR 2
Alm (Alarm)
Port 1-8
Port 1-8
LED Lit
Powered
Port Link is down or a
power failure event has
occured.
A green lit LED
indicates that a
network device is
detected and linked up.
A yellow lit LED
indicates that a
network device is
detected and linked up.
LED Off
No Power
Not activated
If the green Link LED is lit and
the yellow speed LED is off, a
network device is detected and
a link has been established at
10Mbps.
Both green and yellow LEDs are
not lit - a port link has not been
established.
6
Advertisement
