Advertisement
Table 5-5.
Signature Analysis Procedure
STEP
ACTION
NOTE:
a. This initialization routine must be performed before signature
analysis is attempted.
If any other programs or actions are
performed on the HP-75 after this initialization routine is
performed, none of the signatures can be guaranteed.
b. Set the signature analizer so that the START, STOP, and CLOCK
lines trigger on a rising pulse.
1.
Procede to table
5-2 and remove W2
of not already
removed.
2.
Press <SHIFT-CTL=-
CLEAR>.
3.
Plug the PMS
into the leftmost
port of the HP=T5
if not already
plugged in.
3. Press
<ATTN>,
<EDIT>,
<EDIT>.
4,
Copy "T13DIAG"
into the HP-75 by
typing:
COPY CARD TO 'U'
<RTN>.
5. Type:
10 SIGNAL & GOTO 10
<RTN>.
6. Type:
CLEARVARS
<RTN>.
T. Type:
<RUN>.
5-8
Advertisement
