Advertisement
HP
5=T.
PMS
827134
Troubleshooting /Testing
INITIAL PREPARATION
problem.
Table 5-1.
Test Procedure
STEP
ACTION
A. TURN ON TEST
1.
Be sure the HP-75
is turned off.
2.
Plug the PMS
into the leftmost
port of the HP=TS.
3.
Press <ATTN>.
If the HP-75 does not turn on, branch to table
5-4 °
B. FUNCTIONAL TEST
1. Load "713DIAG"
into the HP=T75.
2. Type:
RAMTEST <RTN>.
If "Bank A..OK",
and "Bank B..OK" is displayed,
then procede to step C (Battery Test).
If "Bank A..Failed Address 6000" is displayed,
procede to table 5-5. If a failure is reported
at any other address, procede to table 5-6.
Advertisement
