Advertisement
DISASSEMBLY INSTRUCTIONS
2. REMOVAL OF DECK PARTS
2-1: LINK GEAR (R) / CLUTCH GEAR (Refer to Fig. 2-1)
Top Bracket
1. Unlock the support ©.
2. Remove the BOT Sensor Cover and BOT Reflector.
3. Unlock the 3 supports @.
4. Remove the Side Bracket R2 and Spring Earth.
5. Remove the Flap Lever, Link Gear (R) , Cam Gear Ass'y
and BOT Lever.
NOTE
When installing the Link Ass'y and Link Gear (R), align
tone es
the timing Marks.
Spring Earth
T
BOT
Reflector BOT Sensor
2-3: LINK ASS'Y (Refer to Fig. 2-3)
the Link Ass'y in the direction (B).
NOTE
Install the (B) first, then install the (A).
Link Ass'y
Marker
Marker
Marker
2-4: CASSETTE SIDE R (Refer to Fig. 2-4)
2-2: TOP BRACKET / TAPE PIECE GUIDE
1. Unlock the 2 supports @.
(Refer to Fig. 2-2)
2. Remove the Cassette Side R.
;
3. Remove the Pack Spring.
1. Unlock the 4 supports (D.
4. Remove the Locker Spring.
2. Remove the Top Bracket.
5: Unlock euppart ®
3. Remove the Side Bracket R1 and Side Bracket L.
;
Siler
6. Remove the Locker R.
4. Unlock the support @.
5. Remove the Joint Gear.
6. Remove the Bracket R Spring.
Cassette Side L
1. After removing in the direction (A) of Link Ass'y, remove
Fig. 2-4
Advertisement
