Advertisement
DISASSEMBLY INSTRUCTIONS
1-6: MAIN PCB AND BACK PANEL (Refer to Fig. 1-6)
1. Remove the screw ©.
2. Remove the 2 screws @.
3. Remove the Main PGB in the direction of arrow.
NOTE
AC Cord must be removed from the fitting in the back
panel before the Main PCB can be removed.
Main PCB
1-7: CHASSIS SECTION AND FRONT LOADING UNIT 7
(Refer to Fig. 1-7)
1. Remove the screw ©.
2. Remove the screw @.
3. Remove the Front Loading Unit 7 in the direction of arrow
(A).
NOTE
When installing the Front Loading Unit 7, align the timing
marks and pull the Cassette Holder Ass'y in the direction
of arrow (B).
Cassette Holder Ass'y
Advertisement
