Advertisement
DISASSEMBLY INSTRUCTIONS
2-14: MAIN CAM (Refer to Fig. 2-14)
2-15: CAPSTAN DD UNIT (Refer to Fig. 2-15)
1.
Remove the Loading Lever.
1. Remove the 3 screws @.
2.
Remove the Main Brake Lever.
2. Remove the Capstan DD Unit.
3. Remove the Capstan Brake Spring.
NOTE
7.
Remove the Tension Lever.
8.
Remove the Main Cam.
10. Remove the Main Rod Ass'y.
NOTES
1. When installing the Main Rod Ass'y, install side (B) first,
then install side (A).
2. When installing the Loading Lever, align the timing marks.
Capstan Brake Ass'y
Capstan Brake Spring
Main Cam
€>*
:
Tension Lever Spring
Middle Gear
Fig. 2-15
2-16: INCLINED T ASS'Y / INCLINED S ASS'Y
:
Tension Lever
(Refer to Fig. 2-16)
:
's see ronsion Holder
1. Remove the 2 Slider Loadings.
"Se,
2. Remove the Inclined T Ass'y and Inclined S Ass'y.
3. Remove the Loading Gear T Ass'y.
4. Remove the Loading Gear S Ass'y.
NOTE
When installing the Inclined T Ass'y and Inclined S Ass'y,
align the timing marks.
Inclined T Ass'y
Loading Gear T
Loading Lever
Loading Arm Spring
Loading Arm T Ass'y
Loading Gear S
Marker
10
Advertisement
