s
pecifications
Display:
LCD screen with background, max reading
of "1999"
Operating temperature:
Operating humidity:
Storage temperature:
Storage humidity:
Sampling updates:
Measurement range selection:
Measurement category:
Power Source:
Size:
Weight:
Overload Protection and Overvoltage Protection
Auto Turn On/Off function
Data Hold Function
s
i
afety
nforMation
To avoid possible electric shock or personal injury, follow
these guidelines:
•
Protect yourself against electric shock.
•
Avoid any misuse or improper usage to protect the de-
vice from any damage.
•
Before measuring current, check the Meter's accesso-
ries (fuses, probes), ensure the good working condition,
to avoid any damage. Do not use the device with dam-
aged test leads.
•
Do not use the Meter around devices with high elec-
tricity and frequency which can generate interference,
due to avoid misuse, false measurement, damage or
immeasurable values on the screen.
•
Use the device only according to the guidlines and for
appropriate measurements. If you misuse the Meter, it
cannot work properly in the future.
•
Do not operate the Meter around explosive gas, vapor,
or dust.
•
Check the device before every usage, verify the Meter's
operation in the selected position and ensure the con-
nection of the test leads.
•
If you do not know the range what you want to meas-
ure, set up the switch to the highest measuring value
and go backwards until it achieves the appropriate
range.
•
To avoid any damage, do not use the device for measur-
ing more than the rated input voltage.
•
Use caution when working with voltages above 60V dc,
or 30V ac. These voltages pose a shock hazard.
•
When using the probes, keep the fingers behind the
finger guards.
•
Before rotating the range switch to select functions, dis-
connect test leads from the circuit under test.
•
To avoid possible damage to the Meter or to the
equipment under test, disconnect circuit power and
discharge all high-voltage capacitors before testing
diodes, continuity or resistance.
•
Before measuring current turn OFF power to the circuit
before connecting the Meter to the circuit.
•
Replace the batteries as soon as the battery indicator
appears on the screen.
•
Disconnect test leads before opening the case or the
battery door.
•
Do not use the Meter if it operates abnormally.
•
If the product is not in use, remove the battery and
store the Meter in a cool, dry place, and do not store in
highly humid environment.
•
To avoid fire, or any damage, replace fuses only with the
specified ratings: F 200mA/250V, F 10A/250V.
0°C - 40°C (32°F - 104°F)
<80% RH
-10°C - 60°C (14°F - 122°F)
<70% RH
3/mp
automatic or manual
Cat III 500V
2x AAA 1.5V battery
144 x 70 x 32mm
~200g (with battery)
•
Do not use the device if the back battery cover is open
or does not fit closed and fixed properly.
1
2
SEL
3
V
V
OFF
4
5
1. LCD display
2. SEL – Select button, function selector switch
3. RAN – Range button, manual selection and range function
switch
4. Function switch
5. „A" jack – Input for 10A current measurements
6. NCV LED – Voltage detector function display LED
7. Backlight turn on/off button
8. HOLD – Date Hold button
9. „COM" – common input terminal
10. uA/mA/V
/Ω/°C/°F terminal,
(hereafter „V" terminal)
f
Unction
HOLD button
Data hold function.To hold the present reading, press the
data hold button for a while. Press the button again to resume
normal operation.
RANGE button
To select auto-range or manual range modes.
To change between auto- or manual range modes. In manual
mode, you can select different ranges.
Press the button repeatedly to select different ranges.
SELECT button
While measuring, you can select AC current (alternate cur-
rent) or DC (direct current) functions by this button.
button
Backlight turn on/off. Pressing this button for 2 secs, the back-
light can be turned on and will remain on until another press.
Turn the backlight off, press again for 2 secs, or wait until 20
secs and the backlight will turn off automatically.
M
easUreMents
Voltage Measurements
Turn the rotary switch to V
RAN
µA
NCV
Ω
mA
A
°C/°F
µAmAV
Ω°C°F
6
(DC voltage) or V~ (AC Volt-
6
7
8
9
10