Lincoln Electric Cross Country 300 Service Manual page 118

LINCOLN ELECTRIC
12. The field capacitor can now be removed and replaced.
REPLACEMENT PROCEDURE
1. Carefully position the new field capacitor into the capacitor bracket.
2. Using a 3/8" socket with an extension, tighten the screw securing the capacitor bracket to the fan
guard.
3. Carefully position the front panel onto the machine.
4. Using a 1/2" nutdriver, attach the six screws securing the front panel assembly to the machine.
5. Using a 7/16" nutdriver, attach the nut, lock washer and flat washer securing leads 200B and 200A
to the positive terminal of the field capacitor. See Wiring Diagram.
6. Using a 7/16" nutdriver, remove the nut, lock washer and flat washer securing leads 201 and 201A
to the negative terminal of the field capacitor. See Wiring Diagram.
7. Using a 3/8" nutdriver, attach the two screws securing the output stud cover above the field
capacitor.
8. Perform the Fuel Tank Replacement Procedure.
9. Perform the Case Cover Replacement Procedure.
10. Perform the Retest After Repair Procedure.
Figure F.64 – Output stud cover location
MOUNTING
SCREW (2)
Cross Country™ 300 Service Manual
OUTPUT
COVER
113