System Description; System Limitations - BRP ROTAX 916 i A Series Installation Manual

For a detailed system description refer to the latest issue of the Operators Manual (OM).

SYSTEM LIMITATIONS

Consumer cables must NOT be routed alongside the ignition cables. There is a
Valid installation The Fusebox must not be installed in the cockpit. Installation is only allowed in the engine
positions compartment.
Component tem- Limitations see Chapter 00-00-00 Approval of electric and electronic components.
peratures
limitation
The Regulator temperature must be measured as shown within the following figure:
916 i TYPE A
Figure 3.3: Regulator temperature measurement area
24–00–00
Page 4
December 01 2023
BRP-Rotax
INSTALLATION MANUAL

SYSTEM DESCRIPTION

risk of electromagnetic interference.
Rectifier regulator
1
NOTICE
Component temperature measurement
2
area
Effectivity: 916 i A / C24
Edition 0/Rev. 1