Wireless Lan Advanced Screen - ZyXEL Communications NBG-416N User Manual

Table 27 Network > Wireless LAN > MAC Filter (continued)
LABEL
Set
MAC
Address
Apply
Reset

7.6 Wireless LAN Advanced Screen

Use this screen to allow intra-BSS networking and set the RTS/CTS Threshold.
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 44 Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 28 Network > Wireless LAN > Advanced
LABEL
Wireless Advanced Setup
RTS/CTS
Threshold
NBG-416N User's Guide
DESCRIPTION
This is the index number of the MAC address.
Enter the MAC addresses of the wireless station that are allowed or denied
access to the NBG-416N in these address fields. Enter the MAC addresses in
a valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc.
Click Apply to save your changes back to the NBG-416N.
Click Reset to reload the previous configuration for this screen.
DESCRIPTION
Data with its frame size larger than this value will perform the RTS
(Request To Send)/CTS (Clear To Send) handshake.
Enter a value between 0 and 2347.
Chapter 7 Wireless LAN
77