Restore Configuration - ZyXEL Communications NBG-416N User Manual

17.4.2 Restore Configuration

Restore configuration allows you to upload a new or previously saved
configuration file from your computer to your NBG-416N.
Table 51 Maintenance Restore Configuration
LABEL
File Path
Browse...
Upload
Note: Do not turn off the NBG-416N while configuration file upload is in progress.
After you see a "configuration upload successful" screen, you must then wait one
minute before logging into the NBG-416N again.
Figure 85 Configuration Restore Successful
The NBG-416N automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 86 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NBG-
416N IP address (192.168.1.1). See
set up your computer's IP address.
NBG-416N User's Guide
DESCRIPTION
Type in the location of the file you want to upload in this field or click
Browse... to find it.
Click Browse... to find the file you want to upload. Remember that you
must decompress compressed (.ZIP) files before you can upload them.
Click Upload to begin the upload process.
Appendix C on page 175
Chapter 17 Tools
for details on how to
137