General Wireless Lan Screen - ZyXEL Communications NBG-416N User Manual

7.3.1.5 WPS
WiFi Protected Setup (WPS) is an industry standard specification, defined by the
WiFi Alliance. WPS allows you to quickly set up a wireless network with strong
security, without having to configure security settings manually. Depending on the
devices in your network, you can either press a button (on the device itself, or in
its configuration utility) or enter a PIN (Personal Identification Number) in the
devices. Then, they connect and set up a secure network by themselves. See how
to set up a secure wireless network using WPS in the

7.4 General Wireless LAN Screen

Use this screen to enable the Wireless LAN, enter the SSID and select the wireless
security mode.
Note: If you are configuring the NBG-416N from a computer connected to the wireless
LAN and you change the NBG-416N's SSID, channel or security settings, you
will lose your wireless connection when you press Apply to confirm. You must
then change the wireless settings of your computer to match the NBG-416N's
new settings.
Click Network > Wireless LAN to open the General screen.
Figure 39 Network > Wireless LAN > General
NBG-416N User's Guide
Chapter 7 Wireless LAN
Section 6.2.1 on page 57.
71