13.3 WWW Screen
To change your NBG-416N's World Wide Web settings, click Management >
Remote MGMT to display the WWW screen.
Figure 67 Management > Remote MGMT > WWW
The following table describes the labels in this screen.
Table 45 Management > Remote MGMT > WWW
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset
NBG-416N User's Guide
DESCRIPTION
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the
NBG-416N using this service.
A secured client is a "trusted" computer that is allowed to
communicate with the NBG-416N using this service.
Select All to allow any computer to access the NBG-416N using
this service.
Choose Selected to just allow the computer with the IP address
that you specify to access the NBG-416N using this service.
Note: This only applies on WAN IP.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 13 Remote Management
115