Client List Screen - ZyXEL Communications NBG-416N User Manual

Chapter 10 DHCP Server
Table 38 Network > DHCP Server > Advanced (continued)
LABEL
First DNS Server
Second DNS
Server
Apply
Reset

10.6 Client List Screen

The DHCP table shows current DHCP client information (including IP Address,
Host Name and MAC Address) of network clients using the NBG-416N's DHCP
servers.
Configure this screen to always assign an IP address to a MAC address (and host
name). Click Network > DHCP Server > Client List.
Note: You can also view a read-only client list by clicking the DHCP Table (Details...)
hyperlink in the Status screen.
The following screen displays.
Figure 58 Network > DHCP Server > Client List
98
DESCRIPTION
Select User-Defined if you have the IP address of a DNS server.
Enter the DNS server's IP address in the field to the right. If you chose
User-Defined, but leave the IP address set to 0.0.0.0, User-Defined
changes to None after you click Apply. If you set a second choice to
User-Defined, and enter the same IP address, the second User-
Defined changes to None after you click Apply.
Select DNS Relay to have the NBG-416N act as a DNS proxy. The
NBG-416N's LAN IP address displays in the field to the right (read-
only). The NBG-416N tells the DHCP clients on the LAN that the NBG-
416N itself is the DNS server. When a computer on the LAN sends a
DNS query to the NBG-416N, the NBG-416N forwards the query to the
NBG-416N's system DNS server (configured in the WAN > Internet
Connection screen) and relays the response back to the computer.
You can only select DNS Relay for one of the three servers; if you
select DNS Relay for a second or third DNS server, that choice
changes to None after you click Apply.
Click Apply to save your changes back to the NBG-416N.
Click Reset to begin configuring this screen afresh.
NBG-416N User's Guide