Wan Mac Address - ZyXEL Communications NBG-416N User Manual

4.4.9 WAN MAC Address

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02.
Table 17 Example of Network Properties for LAN Servers with Fixed IP Addresses
Choose an IP address
Subnet mask
Gateway (or default route)
This screen allows users to configure the WAN port's MAC address by either using
the NBG-416N's MAC address, copying the MAC address from a computer on your
LAN or manually entering a MAC address. Once it is successfully configured, the
address will be copied to configuration file. It is advisable to clone the MAC
address from a computer on your LAN even if your ISP does not presently require
MAC address authentication.
Figure 22 Wizard Step 3: WAN MAC Address
The following table describes the fields in this screen.
Table 18 Wizard Step 3: WAN MAC Address
LABEL
Factory Default
Clone the
computer's MAC
address
Set WAN MAC
Address
Back
Next
Exit
NBG-416N User's Guide
192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.
255.255.255.0
192.168.1.1(NBG-416N LAN IP)
DESCRIPTION
Select Factory Default to use the factory assigned default MAC
address.
Select this option and enter the IP address of the computer on the
LAN whose MAC you are cloning. It is advisable to clone the MAC
address from a computer on your LAN even if your ISP does not
presently require MAC address authentication.
Select this option and enter the MAC address you want to use.
Click Back to return to the previous screen.
Click Next to continue.
Click Exit to close the wizard screen without saving.
Chapter 4 Connection Wizard
47