Setup Preparation - Youshiko YC9467 Manual

E7:"CHANNEL 1 or 2 or 3"switch
Before set up
For best results:
• Remove weather station and sensors from the package and place together on a table
or bench, within easy reach.
• Keep sensors and weather station
installing batteries and power supply to allow the sensors and station to connect
repeatedly.

Setup Preparation

Items you will need to setup your station (not included):
New Batteries:
2 (two) AA alkaline or lithium batteries for the weather station.
3 (three) AA alkaline or lithium batteries for the multi-combination sensor.
Optional sensor Model no YC9318
For
2 (two) AA alkaline or lithium batteries for the temperature | humidity sensor
(Optional)
Easy Installation :
This weather station is very easy to set , as it will self set
Automatically , all user have to do is insert batteries in the
Multi-combination Sensor
unit with power supply, , then sensor will connect to display unit , ( If
it does not , then simply press reset button on sensor , which you can
find under the battery cover ) .
Also if you have
Additional
choose CH number on the sensor
That is soon after
Multi-combination Sensor.
Optional sensor Model no YC9318,
temperature / humidity sensor or sensors , then
you insert batteries in Outdoor
E8: Temperature |Humidity selection
button
2 to 10 feet for at least 15 minutes after
and power up the weather station display
and insert batteries in sensor ,
Outdoor