Miscellaneous Configuration; Pc Health Status - AMD SB700 User Manual

Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
ACPI XSDT Table
bits Mode.

3-9 Miscellaneous Configuration

Init Display First
Reset Configuration Date
Resource Controlled by
* IRQ Resource
PCI /VGA Palette SNOOP
Assign IRQ for VGA
Assign IRQ for USB
PCI Latency Timer (CLK)
* PCI Express Relative Items
Maximum Payload Size
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Reset Configuration Data
If you enable this item and restart the system, any Plug and Play configuration data stored in
the BIOS Setup is cleared from memory.
Init Display First
Use this item to specify whether your graphics adapter is installed in one of the PCI E slots or
is integrated on the motherboard. If a PCI E graphics card is installed, the onboard VGA will
be disabled.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some non-standard VGA
cards. This board includes a built-in VGA system that does not require palette snooping so
you must leave this item disabled.
Assign IRQ For USB
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity ofthe
selected IRQ always awakens the system.
Resources Controlled By
play compatible devices. If you choose Auto, you cannot select IRQ DMA and memory base
address fields, since BIOS automatically assigns them.

3-10 PC Health Status

This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.
This table is for 64 Bits OS using, Don't use for win2k or winxp 32
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
PCIEx
Disabled
Auto [ESCD]
Press Enter
Disabled
Enabled
Enabled
[64]
4096
F6:Optimized Defaults
BIOS can automatically configure all the boot and plug and
Menu Level >
F7:Standard Defaults
30
Item Help