Section 7 Options And Accessories; Options Description; Options A 1-A5-International Power Cords; Option 1R Rackmounting - Tektronix 2432 Service Manual

Section 7-2432 Service
OPTIONS AND ACCESSORIES
OPTIONS DESCRIPTION
This section contains a general description of available
options for the 2432 Digital Storage Oscilloscope at time
of manual publication. The options are:
Options A 1-A-5
Option
1R
Option 03
Option 05
Option 11
International Power Cords
Rackmounting
Word Recognizer Probe
Video Option
Probe Power
Operating instructions for the Video Option and the
Word Recognizer Probe optional accessory are found in
the Options section of the Operators Manual. A complete
list of standard accessories supplied with the instrument
and a list of suggested optional accessories, each
identified by part number, are included in this section.
Additional information about instrument options, option
availability, and other accessories can be obtained from
the current Tektronix Products Catalog or by contacting
your local Tektronix Field Office or representative.
OP1"IONS A 1-AS
INTERNATIONAL POWER CORDS
Instruments are shipped with the detachable power-
cord configuration ordered by the customer. Descriptive
information about the international power-cord options is
provided in Section 2, • Preparation for Use.· The following
list identifies the Tek Option number for the available
power cords.
Option A 1 (Universal Euro) Power cord (2.5 m)
Option
A2 (UK)
Power cord (2.5 m)
Option A3 (Australian)
Power cord (2.5 m)
Option A4 (North American) Power cord (2.5 m)
Option A5 (Switzerland) Power cord (2.5 m)
OPTION 1R
RACKMOUNTING
When the 2432 Digital Oscilloscope is ordered with
Option 1 R, it is shipped in a configuration that permits
easy installation into a 19-inch-wide equipment rack. An
optional rackmounting kit may be ordered to convert the
standard oscilloscope to a rackmounted instrument. Instal-
lation instructions for rackmounting are provided in the
documentation supplied with the rackmounting kit and the
1 R Option.
The rear-support kit also is supplied for use when rack-
mounting the scope. Using this rear-support kit enables
the rackmounted instrument to meet all electrical and
environmental specifications of the standard instrument.
Connector-mounting holes are provided in the front
panel of the rackmounted instrument. These holes enable
convenient accessing of the rear panel BNC connectors
and directing the Vertical Channel and External Trigger
input connectors to rear access in an electronics equip-
ment rack. The selection of signals that are routed through
the rackmounting front panel is left to the user. Additional
cabling and connectors required to implement any
through-panel access must be user supplied; however, the
necessary items may be separately ordered from
Tektronix, Inc.
7-1