Table of Contents
Advertisement
Options and Accessories
Introduction
This section contains a general description of instrument options available at
the time of publication of this manual. Also included is a complete list (with
Tektronix part numbers) of standard accessories included with each instrument and
a partial list of optional accessories. Additional information about instrument
options, option availability, and other accessories can be obtained either by
consulting the current Tektronix Product Catalog or by contacting your local
Tektronix Field Office or representative.
Option 05
Option 05 provides additional hardware and software features to simplify
triggering and viewing of television signals. The option adds TV (back-porch) clamp
circuitry to the Channel 2 input and TV trigger coupling modes are provided,
allowing a user to select either horizontal or vertical sync pulses to obtain
horizontal-line-sync or field-sync pulse triggering. This option permits the user to
trigger on a specific line number within a TV field and provides sync polarity
switching for either syne-negative or syne-positive composite video signals.
Options 06 and 09
Options 06 (Counter/Timer/Trigger) and 09 (Counter/Timer/Trigger with Word
Recognizer) allow precision time-interval measurement, event and frequency
counting, delay-by-events .triggering, and logic triggering. The 17-bit Word
Recognizer probe of Option 09 extends the capabilities of these functions.
Option 10
Option 10 adds the hardware and software that allows the instrument to be
remotely controlled and queried using a standard interface system. The interface
implemented conforms to the specifications contained in IEEE Standard Digital
Interface for Programmable Instrumentation (ANSI/IEEE Std 488-1978), commonly
referred to as the General Purpose Interface Bus (GPIB). It also complies with a
Tektronix Standard relating to GPIB Codes, Formats, Conventions and Features.
Option 11
Option 11 provides two probe-power connectors on the rear panel of the
instrument. Voltages supplied at these connectors meet the power requirements of
standard Tektronix active oscilloscope probes.
2467 Operators
7-1
Advertisement
Table of Contents
