Table of Contents
Advertisement
– Remove dash panel trim on driver side ⇒ General body re‐
pairs, interior; Rep. gr. 68; Storage compartments/covers;
Assembly overview – dash panel trim on driver side.
– If fitted, remove knee airbag ⇒ General body repairs, interior;
Rep. gr. 69; Knee airbags; Removing and installing knee
airbag with igniter.
– Remove footwell vent driver side ⇒ Heater, air conditioning
system; Rep. gr. 87; Air duct; Removing and installing foot‐
well vent on driver side.
– First press brake pedal -1- in direction of brake servo, and
hold it in this position.
1 - Brake pedal
2 - Push rod
3 - Retaining lugs
4 - Mounting bracket
– Insert release tool -T10159B- -A- and pull in direction of
driver seat while counter-holding on brake pedal -1-. At this
moment, brake pedal must not be allowed to move towards
driver seat. This action will press retaining lugs -3- of mount‐
ing off ball head of plunger rod -2-.
For the sake of clarity, separation of brake pedal from brake
servo is shown with pedal cluster removed.
– Pull release tool -T10159B- and brake pedal together to‐
wards driver's seat. As a result, brake pedal is pulled off
push rod ball head.
Specified torque
♦ Remove footwell cover on driver side ⇒ General body re‐
pairs, interior; Rep. gr. 68; Compartments/covers; Overview
of fitting locations - compartments/covers.
4.4
Connecting brake pedal to brake servo
– Hold ball head of push rod in front of mounting and push
brake pedal in direction of brake servo, so that the ball head
clicks into place.
GETtheMANUALS.org
Tiguan 2021 ➤, Tiguan RUS 2021 ➤
Brake system - Edition 10.2020
81
4. Brake pedal
Advertisement
Table of Contents
