Table of Contents
Advertisement
Tiguan 2021 ➤, Tiguan RUS 2021 ➤
Brake system - Edition 10.2020
– Set hydraulic unit with control unit facing upwards on ESD
workplace -VAS 6613-.
– Taking care not to tilt control unit, pull it off hydraulic unit.
– Cover control unit solenoids with a lint-free cloth.
– Check cleanliness of hydraulic unit sealing surface; clean
with methylated spirits and a lint-free cloth if necessary.
Hydraulic unit sealing surface must not be worked with a file,
metal scraper, sandpaper or similar.
If hydraulic unit sealing surface is damaged (e.g. scoring,
scratches), hydraulic unit must be renewed together with control
unit.
The seal of the control unit may not be pulled out or raised.
The seal of the control unit cannot be renewed.
3.5
Fitting control unit to hydraulic unit
Special tools and workshop equipment required
♦ ESD workplace -VAS 6613-
♦ Torque screwdriver -V.A.G 1624-
40
Rep. gr.45 - Anti-lock brake system
GETtheMANUALS.org
Advertisement
Table of Contents
