Table of Contents
Advertisement
– Insert brake pad retaining spring -1- into hole in brake cali‐
per -arrow-.
NOTICE
Make sure that the retaining spring is seated properly in the
holes in the brake caliper.
After moving the pistons forwards, carry out basic setting of the
brake system ⇒ Vehicle diagnostic tester.
– Carry out basic setting of brake system using ⇒ Vehicle
diagnostic tester.
– Install wheels.
NOTICE
After changing brake pads, check brake fluid level.
Torque settings
♦
⇒ o2.1 verview – rear brakes", page 57
♦ Wheel bolts ⇒ Running gear, axles, steering; Rep. gr. 44;
Wheels, tyres; Specified torque for wheel bolts.
2.3
Removing and installing brake caliper
Special tools and workshop equipment required
GETtheMANUALS.org
Tiguan 2021 ➤, Tiguan RUS 2021 ➤
Brake system - Edition 10.2020
65
2. Rear brake
Advertisement
Table of Contents
