Table of Contents
Advertisement
3.2
Removing and installing control unit
for electromechanical parking brake -
J540-
The control unit for electromechanical parking brake -J540- is
integrated into the ABS control unit -J104- and cannot be re‐
newed individually.
– Removing and installing ABS control unit -J104-
3.3
Removing and installing parking brake
motor -V282-/-V283-
Removing
– Deactivate vehicle's drive system, and switch off all electrical
consumers.
– Disconnect connector -2- from parking brake motor -1-.
– Unscrew both hexagon socket head bolts -arrows- from
parking brake motor.
– Pull parking brake motor off brake caliper while twisting
parking brake motor back and forth slightly.
– Take out seal.
NOTICE
Take care not to damage annular groove of the seal and the
contact surface of the parking brake motor.
Installing
– Clean annular groove and contact surface of parking brake
motor.
⇒ page 21
GETtheMANUALS.org
Tiguan 2021 ➤, Tiguan RUS 2021 ➤
Brake system - Edition 10.2020
.
71
3. Parking brake
Advertisement
Table of Contents
