Table of Contents
Advertisement
– Raise vehicle.
– Release and pull off electrical connector -3- from front speed
sensor -1-.
– Unscrew bolt -2-, and pull front speed sensor -1- out of
wheel bearing housing.
Installing
Install in reverse order of removal, observing the following:
– Clean inside surface of hole before inserting speed sensor.
Coat front speed sensor all-round with high-temperature
paste -G 052 112 A3-.
Torque settings
♦
⇒ o4.1 verview – speed sensor on front axle", page 42
4.5
Removing and installing speed sensors
on rear axle -G44-/-G46-
⇒ a4.5.1 nd installing rear speed sensor", page 45
⇒ a4.5.2 nd installing speed sensor on rear axle G44/G46, vehi‐
cles with all-wheel drive", page 46
4.5.1
Removing and installing rear speed
sensor
Removing
Removal and installation are described for the left side of vehi‐
cle as an example.
Rear right speed sensor -G44- and rear left speed sensor -G46-
will be henceforth referred to as rear speed sensor.
– Raise vehicle.
Rear speed sensor -1-.
GETtheMANUALS.org
Tiguan 2021 ➤, Tiguan RUS 2021 ➤
Brake system - Edition 10.2020
45
4. Sensors
Advertisement
Table of Contents
