Table of Contents
Advertisement
3 | Advanced Adjustment / Setting
Note
• The auto screen adjust function will operate correctly if an image is displayed in the entire
displayable area of the screen. It will not operate correctly in the following cases:
– When an image is displayed in only part of a screen like the command prompt
– When black is used in the background, such as a wallpaper
Also, when the function may not work correctly in part of the graphics board
Analog Adjustment - Auto Range Adjust
The signal output level can be automatically adjusted to enable display of all color
gradations (0 to 255). When you select "Auto Range Adjust", a message will appear. Select
"Yes".
Analog Adjustment - Clock
Flickering of vertical lines or part of the screen can be minimized.
Note
• It is easy to overlook the point where the setting is suitable, so please finely adjust.
Analog Adjustment - Phase
Flickering or bleeding of the screen as a whole can be minimized.
Note
• Flickering or bleeding may not fully disappear, depending on the PC and graphics board you are
using.
• If vertical stripes appear on the screen after completing the setting, adjust "Clock" again.
Analog Adjustment - Hor. Position / Ver. Position
The display position (horizontal, vertical) of the screen can be adjusted.
Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one
position is provided to display images correctly. The display position can be adjusted to set the
image to its correct position.
14
Advertisement
Table of Contents
