Mark The Led Positions - Ledra Brands THETA 750 SNAP Operating Instructions Manual

1. MARK THE LED POSITIONS

1.1 Measure and mark the Puck positions on
LED
the rail using a short length of masking tape
(Fig 1.1).
1.2 Check for interference with posts, or other
obstructions. Adjust positions accordingly to
avoid all interference.
NOTE! Refer to your drawing or specifications
to measure the correct location and positions of
the Puck.
LED
v.2.14.24
THETA750 SNAP Drill JIG Instruction Sheet
Fig 1.1. Measure and mark the LED Puck positions on the rail.
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
LED spacing
mark LED
positions
with tape
Ledra Brands Inc. 88 Maxwell
www.LedraBrands.com Irvine, CA 92618
F 714.259.9969
P 714.259.9959
6