Theta 750 Snap Drill Jig Case Contents - Ledra Brands THETA 750 SNAP Operating Instructions Manual

THETA 750 SNAP DRILL JIG CASE CONTENTS

Your supplied Puck THETA 750 SNAP Drill Jig case contains the
LED
following equipment.
Please note any irregularities with your supplier ASAP:
1 x Drill Jig unit pre-installed with 1 x 15 and 16mm cutters
1 x Flat Face Spacer (for use ONLY with Flat face / Square Pipe).
1 x Drilling manual (this guide)
2 x 15mm cutters (spares)
1 x 16mm cutter (spare)
1 x Cutter removal tool (double-sided)
1 x 2mm Allen (hex) key
1 x cutting lubricant
1 x 10mm nut driver
1 x 10mm wrench
1 x Insertion pliers
1 x File
NOTE! Please return all provided equipment to
the case upon installation completion.
v.2.14.24
THETA750 SNAP Drill JIG Instruction Sheet
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
Ledra Brands Inc. 88 Maxwell F 714.259.9969
www.LedraBrands.com Irvine, CA 92618 P 714.259.9959
3