Table of Contents
Advertisement
5. LUBRICATE THE CUTTERS
The Drill Jig cutters must be lubricated before
drilling EACH hole.
5.1
Use the supplied cutting lubricant stick to apply
a small amount of lubricant onto the cutter as
shown (Fig. 5.1).
v.2.14.24
THETA750 SNAP Drill JIG Instruction Sheet
5.1 IMPORTANT! Lubricate the cutters before drilling each hole. A light twist action will supply a sufficient amount.
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
Ledra Brands Inc.
88 Maxwell
F 714.259.9969
www.LedraBrands.com
Irvine, CA 92618
P 714.259.9959
10
Advertisement
Table of Contents
