Paradyne Jetstream CPX-1000 Installation Manual page 17

1000-A2-GN20-00
Do Not Service or
Adjust Alone
Do Not Substitute
Parts or Modify
Equipment
September 2002
Danger: Shock Hazard
The CPX-1000 uses a 48 Vdc or a 60 Vdc Plant Battery
for primary power. This voltage is sufficient to overcome skin
resistance and can supply a fatal current level.
Use extreme caution when working around this voltage,
during installation, operation, testing, and adjusting.
Remove the voltage at its point of distribution to the
CPX-1000, before you connect or disconnect power leads
to the equipment (disconnect power).
CAUTION
CLASS 1 LASER
Using controls or adjustments, or performing procedures
other than those specified herein might result in hazardous,
invisible radiation exposure.
Do not look directly into fiber optic connector sockets or you
might seriously harm your eyes.
Note:
Module panel indicators are Class I LED products.
Preface
xiii